Newest Products

This gasket measures 72 x 55 x 7mm and fits La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thickest version with no bevel, used on newer...

M8x55mm stainless steel hex bolt Cross-references: Part number Manufacturer MZ...3  Ascaso 560.417  Fast Ricambi 11878  Iberital 15...

0.6 mm ruby orifice. 20 x 4 mm.  La Marzocco part number F.2.003 This is the 'older', long version, NOT for use with the Linea PB. A shorter vers...

10 x 6 x 1 mm copper washer.  This washer is used for both the bleed screws on the groups as well as the sight glass on La Marzocco, on the grou...

73 x 59 x 0.8mm. Paper shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in...

New version shower screen with La Marzocco logo etched in it. A more rigid screen than the original, the dimensions are 57.5 mm in circumference an...

Does not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.

PTFE plastic with two embedded magnets.

O-ring 02112 Viton   Cross-references: Part number Manufacturer V..502 Ascaso 12315  Astoria CMA 7496020  Bezzera 87.00123  Carimali...

Thicker than the "standard" 1/4" lock nuts.

Seals the internal group siphon tube to the group head. ORING 02062 DIA INT 15,6 SPESS.

M4 x 0.5 mm x 10mm length. Solenoid flange, Faema sight glass face, Nuova Simonelli fork, many more: a very commonly used screw - many other appl...

9 x 4.5 mm opening, which is just big enough to hold the terminal and receive the male protector at the same time. This is slipped over the wire le...

7 x 3 mm opening.

Fits 6.3 x 0.8mm male terminals. These were brass, but now they are nickel plated steel. For wiring from 1 to 2.5 mm diameter. Max temperature +300...

This is a special order item. Please allow 2 - 3 weeks (typically) for the item to be processed prior to shipping. Only fits the Rocky doser

Plastic cover for the bottom of the doser model Rocky grinder, Rancilio part number 38123030.

Plastic support used on the doser model Rocky grinders

This is the bottom portion of two star parts, Rancilio #38123042.

Rancilio Rocky Upper Doser Star

Stock replacement doser lid for all models of the Rancilio Rocky Espresso Grinder with a doser.

This is a special order item. Please allow 2 - 3 weeks for the item to be processed prior to shipping.   Central shaft that goes through the star...

Stock replacement part. "MOLLA GANCIO DOSAT.ROCKY" or, "spring hook doser Rocky".

Stock replacement part Rancilio Rocky Doser Pawl.