Newest Products

1/2" BSP Fixing Nut.   25 x 6mm   Cross-references: Part number Manufacturer F..850 Ascaso 22.01170 Carimali 30370140  Expobar 40340413...

Plastic threaded insert for the front of the GB5 and FB80 steam valve knobs.

13 x 4 x 4mm, NSF approved For steam and water valves of a number of different manufactures, as well as the E-61 Manual Group valves, and many othe...

For the FB80 and GB5 models. Uses the this gasket or the viton version

The new version that uses 5 o-rings. La Marzocco part number A.1.002.01

O-RING GASKET M 0050-20 VITON La Marzocco part number H.1.005

La Marzocco GB5/FB80 Steam Valve Knob Stop Screw.  M6 Thread. Marzocco I.1.015

PTFE Gasket for steam valve seat.  12 x 10 x 1 mm. La Marzocco part number F.4.001

This is the knob only for the new style valve, after SN 5000, referred to as the "New Style threadless". This is the only version that is currently...

1/8" M x 1/8" Female British Standard Pipe

Used in the E61 manual group lever assembly as well as in the GB5/FB80 steam/water valve assembly.  15 x 25mm   Cross-references: Part number Ma...

La Marzocco GS-3/GB-5/FB-80/LINEA Steam Wand Brass Washer 14 x 6.5 x 0.5mm Marzocco part I.4.001

PTFE steam wand spring seat. 15x7.5x10.3 mm.  One per purchase.   Cross-references: Part number Manufacturer MZ.411 Ascaso 11-518 Atel 41...

2.62mm thick with 10.78mm internal diameter - OR 03043   Cross-references: Part number Manufacturer F..467 Ascaso 12300  Astoria CMA 0083...

1/8" BSP thread. The tapered machining used to cut the threads on these tips does not allow for any gasket or o-ring to be used, and they seal with...

Flat Copper Gasket 26 x 21.4 x 2 mm   Cross-references: Part number Manufacturer 21.00087 Carimali 401216000 Casadio 401-216-000 Cimbali ...

For steam and water valves of a number of different manufactures, as well as the E-61 Manual Group valves, and many other valve seats. NBR Rubber, ...

14 x 10 x 1 mm gasket for 1/8" Male BSP fittings, such as the La Cimbali group jet fittings. Designed to seal the male portion of 1/8" fittings a...

24 x 18 x 2mm PTFE gasket. Cross-references: Part number Manufacturer MZ.541 Ascaso P6003.10  ECM Manufacturer 50010070 Expobar 526...

There are now two sizes of spouts due to a revision in the cut at the bottom of the portafilter. Some work best with the small o-ring, and others w...

There are now two sizes of spouts due to a revision in the cut at the bottom of the portafilter. Some work best with the small o-ring, and others w...

Stainless steel portafilter spout for the newest line of La Marzocco portafilters, these will not fit the older threaded style portafilter bodies.

Mechanical gauge with no oil. One 1/8" BSPP (British Standard Pipe Parallel) with a flared, cone seat, 18 mm long threaded fitting. 42mm outside di...

We suggest you use Loctite® #262 with this gasket. This is for the welded stud boilers, not the "cage style" (GS Series) that use the bolt and inte...