Oscar Hydraulics

Bilt Oscar is an innovative descaling device for domestic and office espresso machines.  It paasively removes calcium, magnesium and impurities fro...

Bilt Oscar is an innovative descaling device for domestic and office espresso machines.  It paasively removes calcium, magnesium and impurities fro...

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

Ulka Type EX5. 120V / 60 Hz, 41 W. This Ulka brand vibratory pump is used in many various home espresso machines and in some rare cases, commercial...

Ulka Type EP5. 120 V/60 Hz, 41 W. This Ulka brand vibratory pump is used in many home espresso machines (current model Rancilio Silvia) and in some...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

8 mm outside diameter by 5 mm inside diameter. Sold in one meter (1 meter equals a little over 3 feet) sections.   Cross-references: Part numbe...

For hoses 8.8 - 9.3 mm    Cross-references: Part number Manufacturer 15056001  Astoria CMA 184320200 Gaggia 3449404  LF 170110 Ma...

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

Inversys ARS CP3A/ST5. 120 V/60 Hz, 55 W. This Invensys ARS brand vibratory pump is used in many home espresso machines and is more silent that Ulk...

1/8" M BSP x 6 OD 4 ID compression barb elbow fitting. Cross-Reference: Part number Manufacturer V..549 Ascaso 30400010  Expobar 134919...

Straight 1/8" M X 6/4mm Barb Fitting   Cross-references: Part number Manufacturer S..243 Ascaso 3349301 LF 100135 Magister 0730036...

Straight 1/8" F X 6/4mm Barb Fitting   Cross-references: Part number Manufacturer S..242 Ascaso 3349306 LF 07300376 Nuova Simonelli

Replaces the old plastic frame for rubber vibratory pump supports with two each rubber supports, screws, washers and self-locking nuts. ASSEMBLY (f...

This is the smaller one for the expansion valves, not for the bottom of the water reservoir.   Cross-references: Part number Manufacturer S...

For hoses 7.8 - 8.3 mm    Cross-references: Part number Manufacturer 15056000 Astoria CMA 9824800009 DeLonghi 3449402 LF 65423011 R...

Generic tee fitting, found mostly in the Nuova Simonelli and Victoria Arduino machines.   Cross-references: Part number Manufacturer 1349243 ...

L 1/4" M BSP X 6/4mm compression barb fitting with viton oring.   Cross-references: Part number Manufacturer S..749 Ascaso 3349317 LF 07300...

 1/4" BSP thin fixing nut Cross-references: Part number Manufacturer S..268 Ascaso 30100010 Expobar 1528171 LF 00300002 Nuova Simonel...

This is the retention valve found at the bottom of the Oscar water tank.  These are melted into place at the factory, and can be very difficult to ...

Generic tee fitting 1/4" M x 1/4" F x 1/4" M BSP    Cross-references: Part number Manufacturer S..118 Ascaso 5135280 LF 07300091 Nuova S...

Nuova Simonelli Expansion Valve 1/8" x M7 used in the Nuova Simonelli Oscar as well as the Victoria Arduino Venus Bar and Venus Century models.   C...

1/4" male x 1/4" male expansion valve   Cross-references:  Part number Manufacturer S...25 Ascaso 25-062 Atel 1523405 LF 72012007 Nuova ...