Tier 1 Affiliate Program

Ascaso drain pipe screw   Cross-references: Part number Manufacturer I-77 Ascaso 5151151 LF

New improved water distribution is gained with the Coffee Sensor custom La Marzocco Diffuser Screw due to the six hole design. It also features a l...

Cylinder head screw (M3 x 6mm).  Used for the burr screws on the Eureka Mignon and Nuova Simonelli MCF grinders.  Note that Eureka changed the bu...

Used in the Rancilio Rocky hopper bean diverter, the Rancilio MD-40 grind adjustment collar, as well as the MD-80 upper and lower burr screws. St...

Replacement burr screw for the DF64 ELR single dose grinder.

M5 x 16 mm stainless steel flat head screwUNI 7688 - DIN 965 - ISO 7046   Cross-references: Part number Manufacturer F.1028 Ascaso 0BMQ40 ...

M5 x 12 mm slotted hex head.   Cross-references: Part number Manufacturer MS.111 Ascaso P..182 Ascaso R...40 Ascaso R...49 Ascaso 56...

M5 x 12 mm stainless steel head screw Cross-references: Part number Manufacturer GI1005 Ascaso DI7987-5X8I  Gaggia 996530054229 Gaggia ...

M5 x 12 mm stainless steel head screw Cross-references: Part number Manufacturer VS-64  Anfim AS..55  Ascaso F..985  Ascaso G..201  As...

6 x 16 mm stainless steel with holes. This acts as the diffusor (vite di diffusore) in the La Marzocco group heads. Cross-references: Part n...

Stainless steel M5x10mm screw with flat head  La Marzocco part number VITE5X10

La Marzocco GB5/FB80 Steam Valve Knob Stop Screw.  M6 Thread. Marzocco I.1.015

This is for the new version where the base cover is secured from the bottom. Torx screw that requires a special driver, T-25 security bit with re...

This is for the old version where the base cover is secured from the top. M9 x 19 mm counter-sunk Phillips head screw.   Cross-references: ...

M3 x 12mm stainless steel phillips countersunk screw La Marzocco part number I.1.045

M4 x 0.5 mm x 10mm length. Solenoid flange, Faema sight glass face, Nuova Simonelli fork, many more: a very commonly used screw - many other appl...

This screw is for the old Gaggia lever group tension springs, as well as the screws for the upper burr on a Rancilio MD-50 grinder and the inner ...

Stainless steel M4 x 10mm screw. Used in many applications including Compak and Eureka grinder burr screw.   Cross-references: Part number Manu...

M4 x 0.5 mm x 12mm length. Solenoid flange, Faema sight glass face, Nuova Simonelli fork, many more: a very commonly used screw - many other applic...

Stainless steel countersunk flat head screw M4x12mm UNI 7688 - DIN 965 - ISO 7046   Cross-references: Part number Manufacturer 07075.0.00.03 ...

Cylinder head screw M4x12mm stainless steel - cross cut - UNI 7687 - DIN 7985 - ISO 7045   Cross-references: Part number Manufacturer MI.61 A...

Affixes the micro-switch housing to the body of the MD-50 and MD-80 grinders. Hexagonal head, metric M4

Stainless steel M4 x 0.5 mm x 16mm length with hex socket.   Cross-references: Part number Manufacturer 7816004 Bezzera 10084087 Lavazza ...

Low pan head, flat slot, M4 x 6 mm. Fits the Rocky, MD-40, 50 and 80 grinders. Also used for the Silvia cowling screw as well as Eureka Mignon bu...