Gicar

1/4" BSP, 100mm. The auto-fill probes on some equipment are bent prior to installing into the side of the boiler, so be sure to keep your old one s...

1/8" BSP, 115mm.   Cross-references: Part number Manufacturer CRP.24  Ascaso 400.020  Fast Ricambi 9.0.83.98G  Gicar 1341802  LF 342000...

1/4" BSP, 140mm. The auto-fill probes on Simonelli equipment are bent prior to installing into the side of the boiler, so be sure to keep your old ...

1/4" BSP, 80mm. The auto-fill probes on some equipment are bent prior to installing into the side of the boiler, so be sure to keep your old one so...

PTFE plastic with two embedded magnets.

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...

Fits all Gicar flowmeter bodies, though check your lid: the pin configuration may be different.  It is recommended that you also replace the oring.

Does not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.

NSF certified low pressure flowmeter with 7mm barbed outlet fitting.   Cross-references:  Part number Manufacturer 9.0.99.28G Gicar 5032820 L...