Flair High Heat Temperature Strip
$6.00
Take control of your brew and improve repeatability of your tasty shots by placing these easy to use, easy to read temperature strips on your brew heads!
As the gauge warms to the response temperature, the window starts with a tan or reddish-brown and continues to change to green.
-
TAN window is above actual temperature reading
-
GREEN window is actual temperature reading
-
BLUE window is below actual temperature reading
-
Moisture Resistant: Self-Adhesive Backing
- Estimated Shelf Life of Adhesive: 2 yrs, but will vary depending on application and use
Comes with one (1) customizable temperature strip. Dimensions are 2.25 x .5 inches. With a range of 158 to 212°F / 70 to 100°C to ensure that your brew head is preheated prior to adding your brew water.
*Prior to application, ensure surface is clean and dry. During application, ensure that strip lays flat across face of cylinder or other surface and that no gaps or air pockets are present where water could seep in between surface and strip
** Brew head not included.
