All

6 x 16 mm stainless steel with holes. This acts as the diffusor (vite di diffusore) in the La Marzocco group heads. Cross-references: Part n...

La Marzocco OEM factory cut chrome-covered brass bottomless portafilter. Comes complete with embossed La Marzocco lion logo on the portafilter body...

1/4" Male BSP.  Used in the GS3, Linea Mini, Linea PB and Strada models only. Not the same as the (1/8") one used on the steam valve of the GB5/FB8...

New version shower screen with La Marzocco logo etched in it. A more rigid screen than the original, the dimensions are 57.5 mm in circumference an...

Fits all models of La Marzocco. 1/8" British Standard Pipe thread - fine. 1.2 mm holes. A standard on the GS/3 machine, this steam tip can be fitte...

1/4" Male BSP.  Used in the GS3, Linea Mini, Linea PB and Strada models only. Not the same as the (1/8") one used on the steam valve of the GB5/FB8...

This is a rebuild kit designed specifically for Linea PB, GB5 and FB80 models with serial number 5000 and higher.  La Marzocco part number B.1.001....

1/8" BSP thread. The tapered machining used to cut the threads on these tips does not allow for any gasket or o-ring to be used, and they seal with...

La Marzocco 2mm Pitch Steam Valve Re-build Kit. La Marzocco part number L165/K

1/8" Male BSP. Threads into the top of the FB-80/GB-5/Strada steam valves, or the Linea Classic steam wand. La Marzocco part L192

New stainless steel "Advanced" 7 gram single portafilter basket NOT suitable for the Swift grinders. Accepts a 58 mm or smaller tamper.

For 10 mm steam wands. 80mm long. Two are used on each wand in some cases. La Marzocco part number F.2.017

Used for both the 110 and 220V models. La Marzocco part B.1.004

La Marzocco 14 gram double portafilter basket. Accepts a 57mm tamper piston best. Equivalent to Marzocco L116/A

Includes all wearable parts. La Marzocco B.1.004.K 

Set of o-rings for rebuilding the GS3 MP group assembly.  This kit includes new Kalrez shaft O rings (non-conical), which last 4 times longer than ...

OEM GS3 Steam wand. This wand DOES NOT come with the tip. You MUST PURCHASE THE TIP SEPARATELY. 

Accepts the coarse thread knob/handle. For Linea/FB70 models. No ancillary parts, such as the o-rings or cotter pins are included.   Cross-referenc...

0.6 mm ruby orifice. 20 x 4 mm.  La Marzocco part number F.2.003 This is the 'older', long version, NOT for use with the Linea PB. A shorter vers...

This kit includes all of the parts pictured; there are extra parts to convert the hot water pipe to use the metal articulation joint as well. The s...

Does not include the tip or fixing nut, but any version La Marzocco tip will fit. Approximately 7-1/2" long. This wand will work in conjunction w...

Plastic threaded insert for the front of the GB5 and FB80 steam valve knobs.

This is a retro-fit kit to convert old version steam valves to accept the newer upgraded parts. It was designed specifically for GB5 and FB80 mod...

Assembly required. Note that the anti-vacuum valve is not included, just the cap and gasket. The video tutorial for rebuilding the valve will hel...