All

Low pan head, flat slot, M4 x 6 mm. Fits the Rocky, MD-40, 50 and 80 grinders. Also used for the Silvia cowling screw as well as Eureka Mignon bu...

M5 x 12 mm stainless steel head screw Cross-references: Part number Manufacturer GI1005 Ascaso DI7987-5X8I  Gaggia 996530054229 Gaggia ...

M6 x 16 mm. Slotted - stainless steel, UNI 6109 - DIN 963 - ISO 2009.   Cross-references: Part number Manufacturer S....7 Ascaso 50BAA73745 A...

M5 x 12 mm slotted hex head.   Cross-references: Part number Manufacturer MS.111 Ascaso P..182 Ascaso R...40 Ascaso R...49 Ascaso 56...

Direct from Rancilio, their part #37060514 (replaced #37060513 ~ 08/2017). Sold individually  M5 x 0.5 mm 12 mm length.

M5 x 16 mm stainless steel flat head screwUNI 7688 - DIN 965 - ISO 7046   Cross-references: Part number Manufacturer F.1028 Ascaso 0BMQ40 ...

Stainless steel M6x16mm screw with hexagon socket. Gaggia boiler to grouphead bolt   Cross-references: Part number Manufacturer UN5931-6X1...

6 x 16 mm stainless steel with holes. This acts as the diffusor (vite di diffusore) in the La Marzocco group heads. Cross-references: Part n...

Stainless steel M6x12mm screw with hexagon socket   Cross-references: Part number Manufacturer GI1003 Ascaso UN5931-6X12I  Gaggia 9965...

M6 x 20 mm hex head stainless steel Hi-Torque screw.Used in conjunction with group screen washer.   Nuova Simonelli pasrt number 00000217  

Cylinder head screw (M3 x 6mm).  Used for the burr screws on the Eureka Mignon and Nuova Simonelli MCF grinders.  Note that Eureka changed the bu...

New improved water distribution is gained with the Coffee Sensor custom La Marzocco Diffuser Screw due to the six hole design. It also features a l...

M5 x 12 mm stainless steel head screw Cross-references: Part number Manufacturer VS-64  Anfim AS..55  Ascaso F..985  Ascaso G..201  As...

Stainless steel M4x8mm screw. UNI 7688 -DIN 965 - ISO 7046   Cross-references: Part number Manufacturer K...72  Ascaso 0BDF91  Bezzera 42...

Replacement burr screw for the DF64 ELR single dose grinder.

Used in the Rancilio Rocky hopper bean diverter, the Rancilio MD-40 grind adjustment collar, as well as the MD-80 upper and lower burr screws. St...

Cylinder head screw M4x12mm stainless steel - cross cut - UNI 7687 - DIN 7985 - ISO 7045   Cross-references: Part number Manufacturer MI.61 A...

Stainless steel countersunk flat head screw M4x12mm UNI 7688 - DIN 965 - ISO 7046   Cross-references: Part number Manufacturer 07075.0.00.03 ...

This is for the old version where the base cover is secured from the top. M9 x 19 mm counter-sunk Phillips head screw.   Cross-references: ...

This is for the new version where the base cover is secured from the bottom. Torx screw that requires a special driver, T-25 security bit with re...

M4 x 0.5 mm x 10mm length. Solenoid flange, Faema sight glass face, Nuova Simonelli fork, many more: a very commonly used screw - many other appl...

Cylindrical Phillips head, M4 x 8mm with .05mm thread pitch. These do not fit the Mazzer Major burr set.

M4 x 0.5 mm x 12mm length. Solenoid flange, Faema sight glass face, Nuova Simonelli fork, many more: a very commonly used screw - many other applic...

This screw is for the old Gaggia lever group tension springs, as well as the screws for the upper burr on a Rancilio MD-50 grinder and the inner ...