All

E61 complete infusion valve.  Total length is 53mm. They are a couple versions of this valve so made sure that you measure your existing valve bef...

E61 manual group complete exhaust valve.  Overall length 27mm. Note: The pin is secured with loctite in the factory to ensure is does not come u...

E61 complete brew valve (new version). Round pin - 55mm long. Used in many manual E61 based machines.   Note: The pin is secured with loctite in...

The BWT bestflush valve is recommended to install after the BWT besthead to easily run a few liters of water when replacing new filter.   It is hig...

OEM Rocket complete brew valve. Round pin - 55mm long. These used to be stainless steel but are now brass.     Cross-references: Nuova Ricamb...

3/8" x 3/8" MF BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part n...

E61 complete brew valve. Round pin - 53mm long. Used in many manual E61 based machines.   Cross-references: Nuova Ricambi​ Part number Manu...

Rocket complete infusion valve with triangular pin.  Overall length 52.5mm. These used to be stainless steel but are now brass.   Cross-referenc...

S2 Valve. Back pressure self-priming.   Cross-references:  Part number Manufacturer 1331019 LF C200002112 Rocket

Used in all models of Simonelli and some Victoria Arduino equipment.   Cross-references: Part number Manufacturer S...65 Ascaso 25-002+2...

Rocket Espresso OEM E61 complete brew valve (new version). Round pin - 59.5mm long.   Cross-references: Nuova Ricambi​ Part number Manufa...

Rocket complete exhaust valve.  Overall length 27mm. These used to be stainless steel but are now brass.   Cross-references: Part number ...

The joystick (also called B-Push) steam valve kit allows you to convert your La Pavoni entire steam mechanism from the normal steam / water taps wi...

Fits the following models: CBS-2131XTS-1G, CBS-2131XTS-3L, CBS-2132XTS-1G, CBS-2132XTS-3G, CBS-2141XTS, CBS-2142XTS, CBS-2151XTS HWD-2105, HWD 2105...

Fits models CBS-2051e, CBS-2052e, CBS-2052e20, CBS-2061e, CBS-2062e   Fetco part 1000.00054.00

3/8" x 3/8" MM BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part nu...

E61 manual group complete exhaust valve.   Cross-references: Part number Manufacturer F..238 Ascaso 2161136648  Faema 903828000  Fae...

1/8" x 1/8" MF BSP ball valve Cross-references: Part number Manufacturer V..525 Ascaso 3526697 LF A299904994 Rocket 202241  San Marco ...

E61 complete infusion valve. They are a couple versions of this valve so made sure that you measure your existing valve before ordering.   Cross-...

3/8" x 3/8" FF BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part nu...

This is the retention valve found at the bottom of the Oscar water tank.  These are melted into place at the factory, and can be very difficult to ...

Fits models HWD-2110 TOD   Fetco part 1102.00158.00

Fits models CBS-2031e, CBS-2031s, CBS-2032e, CBS-2032s, CBS-2041e, CBS-2042e, CBS-2051e, CBS-2052e, CBS-2052e20, TBS-21A   Fetco part 1000.00095.00

Fits the following models: CBS-2052e, CBS-2052e20, CBS-51H10, CBS-51H15, CBS-52H15, CBS-52H20, CBS-61H, CBS-62H, CBS-71A, CBS-72A, IP44-CBS-52H15, ...