Appia II Hydraulics

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

So are you having trouble finding a fitting to connect your European espresso machine to American plumbing? This is THE part you will need to insta...

So are you having trouble finding a fitting to connect your European espresso machine to American plumbing? This is THE part you will need to insta...

Also called siphon, anti-siphon or vacuum breaker valve. This valve allows air to escape the boiler as the water heats up, hissing and then closing...

Standard brass body Rotoflow® (Fluidotech) brand clamp flange rotary vane water pump.  The most common pump style used in commercial espresso machi...

There are many names for this part, but a brief description should suffice: this valve allows air to escape the boiler as the water heats up, hissi...

3/8" Female BSP x 3/8" Female BSP with elbow.  Operating pressure: 10 barMax temperature: 90 CDiameter: 8mm (ID) x 12mm (OD)m

Comes with factory certification that the valve will open in the event of a boiler over-pressurizing. Set to open at 1.8 bar. This is the most comm...

There are many names for this part, but a brief description should suffice: this valve allows air to escape the boiler as the water heats up, hissi...

3/8" Female British Standard Pipe, with two conical connection. Operating pressure: 10 barMax temperature: 90 CDiameter: 8mm (ID) x 12mm (OD)

O-ring 02112 Viton   Cross-references: Part number Manufacturer V..502 Ascaso 12315  Astoria CMA 7496020  Bezzera 87.00123  Carimali...

***PRICE PER FOOT*** 20 mm inside diameter. Order 5 quantity for 5 feet minimum or more

O-RING 0117 EPDM. This o-ring is used in the upper portion of the steam wand nut, the steam valve fitting to body, the retention valve as well as t...

Straight 1/8" M X 6/4mm Barb Fitting   Cross-references: Part number Manufacturer S..243 Ascaso 3349301 LF 100135 Magister 07300362...

3/8" x 3/8" MF BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part n...

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

Low profile adapter for threading the 1/4" anti-vacuum valve into the 3/8" Tee fitting. 16 mm tall. Equivalent for Simonelli part number 07300099

PTFE plastic with two embedded magnets.

VE146NV - fittings ø 1/4"FF - max 10 bar, Viton® seal, 2.5 mm orifice, with coil ZB09 9W 220/230V 50/60Hz. Fluid temperature tolerances from -10°C ...

Calibration pressure 1.8 bar, steam outlet flow rate 77 Kg/h, viton seal, operating temperature -20/+200°C, CE/PED certified valve. These are new a...

Two 1/8" vertically mounted fittings. 60mm outside diameter. 0 - 2.5 x 0 - 15 bar.   Cross-references: Part number Manufacturer P...52  Asca...

1/4" female BSP fittings. Water inlet flow orifice measuring 1.15 mm - NSF approved. Some flow-meters have 1/8" fittings, so be sure you are orderi...