Aurelia Hydraulics

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

So are you having trouble finding a fitting to connect your European espresso machine to American plumbing? This is THE part you will need to insta...

PTFE Gasket for 1/4" Fittings 18 x 13 x 2mm Cross-references: Part number Manufacturer C..377 Ascaso 0510190  BFC A1200166  Fiorenzato ...

So are you having trouble finding a fitting to connect your European espresso machine to American plumbing? This is THE part you will need to insta...

Standard brass body Rotoflow® (Fluidotech) brand clamp flange rotary vane water pump.  The most common pump style used in commercial espresso machi...

Also called siphon, anti-siphon or vacuum breaker valve. This valve allows air to escape the boiler as the water heats up, hissing and then closing...

There are many names for this part, but a brief description should suffice: this valve allows air to escape the boiler as the water heats up, hissi...

Comes with factory certification that the valve will open in the event of a boiler over-pressurizing. Set to open at 1.8 bar. This is the most comm...

3/8" Female BSP x 3/8" Female BSP with elbow.  Operating pressure: 10 barMax temperature: 90 CDiameter: 8mm (ID) x 12mm (OD)m

3/8" Female British Standard Pipe, with two conical connection. Operating pressure: 10 barMax temperature: 90 CDiameter: 8mm (ID) x 12mm (OD)

There are many names for this part, but a brief description should suffice: this valve allows air to escape the boiler as the water heats up, hissi...

O-RING 0117 EPDM. This o-ring is used in the upper portion of the steam wand nut, the steam valve fitting to body, the retention valve as well as t...

***PRICE PER FOOT*** 20 mm inside diameter. Order 5 quantity for 5 feet minimum or more

3/8" x 3/8" MF BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part n...

Low profile adapter for threading the 1/4" anti-vacuum valve into the 3/8" Tee fitting. 16 mm tall. Equivalent for Simonelli part number 07300099

PTFE plastic with two embedded magnets.

Two 1/8" vertically mounted fittings. 60mm outside diameter. 0 - 2.5 x 0 - 15 bar.   Cross-references: Part number Manufacturer P...52  Asca...

3/8" M x 1/4" M BSP  Fitting   Cross-references: Part number Manufacturer AMD.98 Ascaso V..313 Ascaso 25716 Astoria CMA 25716002 Astori...

Not only a sight glass o-ring: where other manufactures use copper or paper seals, Nuova Simonelli use this o-ring to seal some metal fittings on t...

Calibration pressure 1.8 bar, steam outlet flow rate 77 Kg/h, viton seal, operating temperature -20/+200°C, CE/PED certified valve. These are new a...

VE146NV - fittings ø 1/4"FF - max 10 bar, Viton® seal, 2.5 mm orifice, with coil ZB09 9W 220/230V 50/60Hz. Fluid temperature tolerances from -10°C ...

Generic BSP thread nut for 1/4" fittings, including the Silvia steam valve to frame and the S-20/Epoca 1 group heating elements.