Aurelia II Group Head

This gasket measures 73 x 57 x 10mm. Also available in 8mm, 8.5mm and 9mm as well as in silicone in 8mm and 8.5mm.  

Thermostat bracket that will fit most thermostats

Fits all Gicar flowmeter bodies, though check your lid: the pin configuration may be different.  It is recommended that you also replace the oring.

02300 EPDM rubber, this is installed underneath the group bell.

M8 x 8 mm, 3mm orifice. Cross-references: Part number Manufacturer S..416 Ascaso 25-039 Atel 5072823 LF 07300225 Nuova Simonelli

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...

This is the most common solenoid voltage connector.  It is of square shape and the distance between the female voltage terminal slots is 12mm (left...

O-ring 02093 EPDMring thickness 1.78 mm - internal ø 23.52 mm   Cross-references: Part number Manufacturer F..440 Ascaso 15-094 Atel 11-138...

M4 x 0.5 mm x 12mm length. Solenoid flange, Faema sight glass face, Nuova Simonelli fork, many more: a very commonly used screw - many other applic...

M8 x 1.25 mm, 2.5mm orifice. Cross-references: Part number Manufacturer S..415 Ascaso 25-037 Atel 5063127 LF 07300127 Nuova Simonelli

Used on the Adonis, Appia, Aurelia, Mac 2000 and Premier group heads 3/8" M - 3/8" M    Cross-references: Part number Manufacturer S..129 Asca...

Used on the Adonis, Appia, Aurelia, Mac 2000 and Premier group heads.   Cross-references: Part number Manufacturer S..126 Ascaso 1439020 LF ...

Four per group on the Aurelia models. 6 x 35mm

Includes only one per purchase. The image is provided to demonstrate the two different sides of the part.