Classe 5 Hydraulics

These will only connect the flowmeter to flared pipes and fittings. 

3/4" BSP locking nut.   Cross-references:  Part number Manufacturer 506.399  Fast Ricambi 507.052  Fast Ricambi 3523086  LF 18010648  ...

So are you having trouble finding a fitting to connect your European espresso machine to American plumbing? This is THE part you will need to insta...

3/8" thread, weighted for balance. Note: An additional gasket is required. Cross-references:  Part number Manufacturer R..415 Ascaso 8R445  D...

3/8" Female British Standard Pipe, with two conical connection. Operating pressure: 10 barMax temperature: 90 CDiameter: 8mm (ID) x 12mm (OD)

3/8" Female BSP x 3/8" Female BSP with elbow.  Operating pressure: 10 barMax temperature: 90 CDiameter: 8mm (ID) x 12mm (OD)m

3/8" x 3/8" MM BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part nu...

3/8" British Standard Pipe x 5 mm, uses a 19 mm wrench.   Cross-references: Part number Manufacturer 4038136012  Faema L183/1  La Marzocco ...

***PRICE PER FOOT*** 20 mm inside diameter. Order 5 quantity for 5 feet minimum or more

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

Thin copper washer for 3/8" fittings Cross-references: Part number Manufacturer F..783  Ascaso G..335  Ascaso R....3  Ascaso SM.129  As...

For steam and water valves of a number of different manufactures, as well as the E-61 Manual Group valves, and many other valve seats. NBR Rubber, ...

13 x 4 x 4mm, NSF approved For steam and water valves of a number of different manufactures, as well as the E-61 Manual Group valves, and many othe...

PTFE plastic with two embedded magnets.

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...

Standard brass body Rotoflow® (Fluidotech) brand clamp flange rotary vane water pump.  The most common pump style used in commercial espresso machi...

This is the Gicar FMRT-F-F version, with a 1.15 mm diameter orifice (nozzle). G 1/4" female threads. Cross-references: Part number Manufacturer ...

Does not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.

O-ring 02112 Viton   Cross-references: Part number Manufacturer V..502 Ascaso 12315  Astoria CMA 7496020  Bezzera 87.00123  Carimali...

Clear indicator lamp 230V   Cross-references:  Part number Manufacturer CZA179  Ascaso CZA263  Ascaso H28870  Ascaso LO.353  Ascaso LO...

Internal teeth, 26 mm x 18 mm Cross-References: Part number Manufacturer 1348829 LF 37431600 Promac 37431600 Rancilio

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...