Classic Pro Hydraulics & Boiler

The Gaggia Classic Pro comes from the factory with an OPV that opens at 12-14 bars which is much higher than the standard 9 bars that is typically ...

Bilt Oscar is an innovative descaling device for domestic and office espresso machines.  It paasively removes calcium, magnesium and impurities fro...

EPDM O-Ring with many applications. Thickness 2.62 mm - Internal Ø 9.92 mm   Cross-references: Part number Manufacturer C..162  Ascaso GI.1...

Graphite thermal grease for use with bi-metal contact thermostats. Thermal conductivity 1.93W/m-k Breakdown 10kv voltage Low thermal impedance Sta...

O-ring silicone 167 (0167) For Gaggia Baby, Carezza, Classic, Evolution and New Baby Thickness 3.53 mm - Internal Ø 63.50 mm   Cross-references: ...

There are many other applications for this o-ring besides the solenoid flange. This a silicone version of OR 02025. A Viton® rubber version is also...

Boiler Group 120V/230V.  Does not include the boiler gasket or the steam valve oring.   Cross-references: Part number Manufacturer GI.996 Asca...

This sized o-ring are used in almost every espresso machine manufacture for a multitude of applications, mostly involving the steam and water valve...

Contact Thermostat 145°C  M4 thread.   We recommend the use of thermal paste (or “grease”) to aid heat transfer between the switch and contact surf...

Ulka Type EFP5. 120 V/60 Hz, 52 W. This Ulka brand vibratory pump is used in many home espresso machines and in some rare cases, commercial machine...

This sized o-ring are used in almost every espresso machine manufacture for a multitude of applications, mostly involving the steam and water valve...

Ulka Type EAP5. 120 V/60 Hz, 52 W. This Ulka brand vibratory pump is used in many home espresso machines and in some rare cases, commercial machine...

This is the complete replacement OPV for a Gaggia Classic Pro.  It screws directly into the pump and is not adjustable.  It opens at ~12 bars from ...

Contact Thermostat 107°C  M4 thread.   We recommend the use of thermal paste (or “grease”) to aid heat transfer between the switch and contact surf...

8 mm outside diameter by 5 mm inside diameter. Sold in one meter (1 meter equals a little over 3 feet) sections.   Cross-references: Part numbe...

9 x 4.5 mm opening, which is just big enough to hold the terminal and receive the male protector at the same time. This is slipped over the wire le...

High temp reinforced silicone hose, for steam and hot water connections. You may have to cut the tube with a blade or scissors to fit. Fits most Ga...

Ulka Type EAX5. 120 V/60 Hz, 52 W. This Ulka brand vibratory pump is used in many home espresso machines and in some rare cases, commercial machine...

For hoses 7.8 - 9.5 mm   Cross-references: Part number Manufacturer 12000892 Gaggia 12000361 Gaggia 996530007742 Gaggia 5035467 ...

Thermal safety fuse 184C. One time use, not resettable. Used to prevent overheating of boiler in case of thermostat failure. Butt splice connector ...

Stainless steel M6x16mm screw with hexagon socket. Gaggia boiler to grouphead bolt   Cross-references: Part number Manufacturer UN5931-6X1...

Fits 6.3 x 0.8mm male terminals. These were brass, but now they are nickel plated steel. For wiring from 1 to 2.5 mm diameter. Max temperature +300...

Inversys ARS CP3A/ST5. 120 V/60 Hz, 55 W. This Invensys ARS brand vibratory pump is used in many home espresso machines and is more silent that Ulk...

Gaggia brass solenoid valve and coil, 120 Volt. Includes the two seals on the bottom ports. Does not include bolts or wires.    Cross-references: ...