GB5 / FB80 Boiler

Graphite thermal grease for use with bi-metal contact thermostats. Thermal conductivity 1.93W/m-k Breakdown 10kv voltage Low thermal impedance Sta...

PRESSURE SWITCH XP110 125 0.5-1.2 BAR 1/4". Connection ø 1/4"M - 15A 125/250V, preset 1 bar. It should be noted that these pressurestats were not d...

PTFE Gasket for 1/4" Fittings 18 x 13 x 2mm Cross-references: Part number Manufacturer C..377 Ascaso 0510190  BFC A1200166  Fiorenzato ...

19 x 13.5 x 1.5 mm - For the 1/4" group head, drain cup and boiler fittings, as well as pretty much all of the other 1/4" fittings on Marzocco or...

Comes with factory certification that the valve will open in the event of a boiler over-pressurizing. Set to open at 1.8 bar. This is the most comm...

53 x 43 x 3mm. Fits any 1-1/4" flange threaded element. Cross-references: Part number Manufacturer CA..20 Ascaso 74.00011 Carimali 8G98...

PRESSURE SWITCH XP110 125 1.0-2.5 BAR 1/4". Connection ø 1/4"M - 16A 125/250V, preset 1.5 bar. It should be noted that these pressurestats were not...

3/8" x 3/8" MF BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part n...

1/4" BSP, 140mm. The auto-fill probes on Simonelli equipment are bent prior to installing into the side of the boiler, so be sure to keep your old ...

Bi-metal contact thermostat with manual reset.  135°C/275°F 16A 250V We recommend the use of thermal paste (or “grease”) to aid heat transfer betwe...

Thermostat bracket that will fit most thermostats

Paper composite 17 x 13 x 2 mm

Immersed Length 600 mm - 2 PolesConnection Ø 1"1/4For 3 Groups Coffee Machines.  Does not include gasket. Cross-references: Part number Manuf...

15 x 10 x 1mm  Copper Washer   Cross-references: Part number Manufacturer R..129 Ascaso 529.373  Fast Ricambi R222 Grimac 1426 Iber...

16A 250V Manual reset thermostat 130°C/266°F (bipolar) (CE).   We recommend the use of thermal paste (or “grease”) to aid heat transfer between the...

"Boosted" heating element for the three group machines. 50 cm immersed length. 37 mm socket would be best, but a 36 mm fits barely.   Immersed Leng...

Immersed Length 500 Mm - 2 PolesConnection Ø 1-1/4"For Coffee Machines With 3 Groups.  Does not include gasket. Cross-references: Part number...

103 x 72 mm, paper.

Uses 1/4" copper gasket.   Cross-references: Part number Manufacturer MZ..24  Ascaso 4525686  Astoria CMA 3510410  BFC 520.163  Fast ...

These are shipped straight and unbent: gently bend with a pipe bender to fit. La Marzocco part number TL09

OEM Marzocco product. 3/8" BSP, stainless steel body, Viton® seal, 1.8 Bar, certified. La Marzocco part number B.2.024 (Old L180)

M8 x 20mm Bolt.  1.25 metric thread. Cross-references: Part number Manufacturer AS..64 Ascaso AS..65 Ascaso R..117 Ascaso SP.165 Ascas...

This is a special order item. Please allow 3 - 4 weeks (typically) for the item to be processed prior to shipping For two group 220V machines. 650 ...

This is a special order item. Please allow 3 - 4 weeks (typically) for the item to be processed prior to shipping For two group 220V machines. 280 ...