GB5 / FB80 Steam Valve

Fits all models of La Marzocco. 1/8" British Standard Pipe thread - fine. 1.2 mm holes. A standard on the GS/3 machine, this steam tip can be fitte...

This is a rebuild kit designed specifically for Linea PB, GB5 and FB80 models with serial number 5000 and higher.  La Marzocco part number B.1.001....

1/8" BSP thread. The tapered machining used to cut the threads on these tips does not allow for any gasket or o-ring to be used, and they seal with...

1/8" Male BSP. Threads into the top of the FB-80/GB-5/Strada steam valves, or the Linea Classic steam wand. La Marzocco part L192

Does not include the tip or fixing nut, but any version La Marzocco tip will fit. Approximately 7-1/2" long. This wand will work in conjunction w...

Plastic threaded insert for the front of the GB5 and FB80 steam valve knobs.

This is a retro-fit kit to convert old version steam valves to accept the newer upgraded parts. It was designed specifically for GB5 and FB80 mod...

Assembly required. Note that the anti-vacuum valve is not included, just the cap and gasket. The video tutorial for rebuilding the valve will hel...

La Marzocco steam valve shaft extension. overall length 28 mmthreaded pins M4 - M6 Cross-references: Part number Manufacturer MZ..502 Ascaso...

Old part number A.1.001, replaced by A.1.001.01, now includes the threaded fitting for the anti-vacuum valve. Used in GB5, FB80 and Strada machin...

This it the part that the rubber seat seal presses against, closing off the steam.  La Marzocco part number F.3.007

Stainless steel adapter. 1/2" male British Standard Pipe. La Marzocco part number A.1.005

Threads into valve knob, and then the little white symbols for steam or water snap into it. Cross-references: Part number Manufacturer 111.27...

This is the knob only for the new style valve, after SN 5000, referred to as the "New Style threadless". This is the only version that is currently...

The new version that uses 5 o-rings. La Marzocco part number A.1.002.01