Mazzer Grind Collar Adjustment Pin - Solid Metal
Solid stainless steel adjustment pin for all Mazzer Espresso Grinder models. Not only does it look and feel cooler, you will never replace this a...
View full detailsSolid stainless steel adjustment pin for all Mazzer Espresso Grinder models. Not only does it look and feel cooler, you will never replace this a...
View full detailsCylindrical Phillips head, M4 x 8mm with .05mm thread pitch. These do not fit the Mazzer Major burr set.
Stainless steel Mazzer grinder doser finger protector for the Kold, Kony, Major, Robur, Royal, Stark and Super Jolly - basically all models excep...
View full detailsReplacement foot for Mazzer Espresso Grinders, except the Robur and Kold models. This foot now includes the M5 x 12 x 0.75 metric stud molded into ...
View full details"0" for off "1" for on. The dashes have no significance to the amount of time the switch stays on
For Mazzer Timer Switches Only.
Espresso coffee grounds tray for Mazzer Super Jolly (Normale), Kony and Major, Robur, Royal and Stark model espresso grinders. The first series "ro...
View full detailsThis aftermarket Mazzer replacement coffee bean hopper lid works with the large hoppers that come with the Robur, Major, Kony and Super Jolly / Nor...
View full detailsUsed in the 'E' version Kony, Major, Robur and Royal, and the doser versions of the Kony, Major, Major 'Grocery', Robur, Royal and Stark model Ma...
View full detailsReplacement burrs for the Mazzer Kony Conical Espresso/Coffee Grinder. Also fits the La Marzocco Vulcano. Aftermarket burrs made to the same quali...
View full detailsMazzer Kony Espresso Grinder Conical Burr Set. 63mm Outside Diameter. Also fit the La Marzocco Vulcano. Conical burr, OEM part 191C.
Very similar to the Robur, but the collar adapter is shorter (the safety locking tab is closer to the center of the grinding chamber throat). Lid s...
View full detailsThis is a special order item. Please allow 2 to 3 weeks (typically) for shipping. For Kony model only.
This only fits the larger version hoppers used in the Kony, Major E, Robur, etc
The Mazzer Logo Plaque is cast metal and fits all Mazzer Espresso grinders. They used to come with a portion painted green, but now are shipped o...
View full details14.5 x 12.5 mm. Also referred to as a release spring
Comes with an adhesive covering for protection - remove after installing
Two-pole rotary switch with auxiliary phase, 5 x 5 mm pin.
Longer, 72mm portafilter support fork for the Kony and Robur Electronic (E) models.
This Mazzer replacement coffee bean hopper lid works with the large hoppers that come with the Robur, Major, Kony and Super Jolly / Normale Espress...
View full detailsThis is a special order item. Please allow 6 to 8 weeks (typically) for shipping. A machine press may be needed to install the bearings (not in...
View full detailsFits most of the main power switches. Some switch pins have a female threaded receptacle for the screw that this knob comes with, but this knob wi...
View full details