Musica Hydraulics

Ulka Type EX5. 120V / 60 Hz, 41 W. This Ulka brand vibratory pump is used in many various home espresso machines and in some rare cases, commercial...

Ulka Type EP5. 120 V/60 Hz, 41 W. This Ulka brand vibratory pump is used in many home espresso machines (current model Rancilio Silvia) and in some...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

Bilt Oscar is an innovative descaling device for domestic and office espresso machines.  It paasively removes calcium, magnesium and impurities fro...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

This sized o-ring are used in almost every espresso machine manufacture for a multitude of applications, mostly involving the steam and water valve...

There are many other applications for this o-ring besides the solenoid flange. This a silicone version of OR 02025. A Viton® rubber version is also...

Bilt Oscar is an innovative descaling device for domestic and office espresso machines.  It paasively removes calcium, magnesium and impurities fro...

This sized o-ring are used in almost every espresso machine manufacture for a multitude of applications, mostly involving the steam and water valve...

8 mm outside diameter by 5 mm inside diameter. Sold in one meter (1 meter equals a little over 3 feet) sections.   Cross-references: Part numbe...

Santoprene rubber, internal pump connection ø 6 mm, hose-end fitting ø 7.5 mm.   Cross-Reference: Part number Manufacturer 7303001  Bezz...

O-ring 02112 Viton Cross-references: Part number Manufacturer V..502 Ascaso 12315  Astoria CMA 7496020  Bezzera 87.00123  Carimali ...

For hoses 8.8 - 9.3 mm Cross-references: Part number Manufacturer 15056001  Astoria CMA 184320200 Gaggia 3449404  LF 170110 Magi...

PTFE plastic with two embedded magnets.

Replaces the old plastic frame for rubber vibratory pump supports with two each rubber supports, screws, washers and self-locking nuts. ASSEMBLY (f...

This is the smaller one for the expansion valves, not for the bottom of the water reservoir.   Cross-references: Part number Manufacturer ...

90 degrees rubber vibratory pump support foot.

100/120V 1/8" F x 1/8" F Two-Way CEME Solenoid   Cross-references: Part number Manufacturer C..461 Ascaso 5220VN2,0NR44 CEME 5220VN2,0NRO...

Generic tee fitting 1/4" M x 1/4" M x 1/4" F BSP   Cross-references: Part number Manufacturer S..160 Ascaso 04057016 Bianchi 22.01022 Cari...

Fits all Gicar flowmeter bodies, though check your lid: the pin configuration may be different.  It is recommended that you also replace the oring.

1/4" female BSP fittings. Water inlet flow orifice measuring 1.15 mm - NSF approved. Some flow-meters have 1/8" fittings, so be sure you are orderi...

Generic tee fitting, found mostly in the Nuova Simonelli and Victoria Arduino machines.   Cross-references: Part number Manufacturer 1349243...

3/8" M x 1/4" M BSP  Fitting   Cross-references: Part number Manufacturer AMD.98 Ascaso V..313 Ascaso 25716 Astoria CMA 25716002 Astor...