New Coffee Club Subscriber

O-RING 0176 EPDM.  Thickness 3.53 mm - Internal ø 73.03 mm Used as the stainless steel element gasket for La Pavoni Europiccola, Professional and S...

Almost too many applications to list here, but used primarily with Brasilia water inlet and Rancilio and San Marco retention valves. ring thickness...

There are many applications for this o-ring, most of them having to do with various  manufacturers steam wands. O-ring 0115 VitonThickness 2.62 Mm ...

O-RING 0062-20 EPDM.  ring thickness 2.0mm - internal ø6.2mm   Cross-references: Part number Manufacturer 1786394 LF C400003008  Rocket

O-RING 0080-20 Siliconering thickness 2.0mm - internal ø8.0mm   Cross-references: Part number Manufacturer I-2927 Ascaso 5332144800  DeLon...

O-ring 02015 EPDM Thickness 1.78 Mm - Internal Ø 3.69 mm   Cross-references: Part number Manufacturer BF..85 Ascaso F.1728 Ascaso G..334 As...

Silicone o-ring 03056. Seals the outside of the reservoir water inlet nipple.   Cross-Reference: Part number Manufacturer M..204 Ascaso 126...

Red Silicone R5 O-Ring ring thickness 1.9 mm - internal ø 5.7 mm Cross-references: Part number Manufacturer R..469 Ascaso 25-106 Atel 11...

For the new Simonelli steam wand and hot water pipe nut to valve Thickness 2.00mm - Internal Ø 16mm   Cross-references: Part number Manufacture...

02300 EPDM rubber, this is installed underneath the group bell.

2.26mm thick x 12.8mm internal diameter - O3050 EPDM   Cross-references: Part number Manufacturer MZ.410 Ascaso P2042.5 ECM 3060608 ...

O-RING GASKET M 0050-20 VITON La Marzocco part number H.1.005

Not only a sight glass o-ring: where other manufactures use copper or paper seals, Nuova Simonelli use this o-ring to seal some metal fittings on t...

There are now two sizes of spouts due to a revision in the cut at the bottom of the portafilter. Some work best with the small o-ring, and others w...

1.00mm thick with 4.50mm internal diameter   This is the o-ring between the steam tip and the steam wand on the Gaggia Classic Pro.

O-ring 04150 Viton ring thickness 3.53 mm - internal ø 37.69 mm   Cross-Reference: Part number Manufacturer 5034986 LF F.2.014 Marzocco

Set of o-rings for rebuilding the GS3 MP group assembly.  This kit includes new Kalrez shaft O rings (non-conical), which last 4 times longer than ...

O-ring ORM 0310-40 Silicone Thickness 4.00 mm - ø internal 31.00 mm   Cross-references: Part number Manufacturer 1786393 LF A449904547 Rocket

O-ring 02093 EPDMring thickness 1.78 mm - internal ø 23.52 mm   Cross-references: Part number Manufacturer F..440 Ascaso 15-094 Atel 11-138...

There are now two sizes of spouts due to a revision in the cut at the bottom of the portafilter. Some work best with the small o-ring, and others w...

Used primarily in E61 style steam and water valves. O-ring 03068 EPDMring thickness 2.62 mm - internal ø 17.13 mm   Cross-references: Part number...

La Pavoni piston sleeve o-ring.  Fits all Millennium models of Europiccola and Professional. O-ring 0152 Viton Rubber - ring thickness 3.53 mm - in...

For the Marzocco paddle group, this is the large lower o-ring, three per group. Three are also used for the GS3 drain connection. Ring Thickness 2...

Used primarily as an o-ring for the La Cimbali, Faema, Grimac and VFA steam wands.   Cross-references: Part number Manufacturer C..187 Ascaso ...