Newest Products

Complete valve for steam and water tap.  Length 25mm.   Cross-references: Part number Manufacturer 0510050 BFC P6003.9 ECM A2200203 F...

1/4" FFF BSP ball valve.   Cross-references: Part number Manufacturer P3528 ECM 5146580 LF 560220 Nuova Ricambi P3528 Profitec

The joystick (also called B-Push) steam valve kit allows you to convert your La Pavoni entire steam mechanism from the normal steam / water taps wi...

This is the retention valve found at the bottom of the Oscar water tank.  These are melted into place at the factory, and can be very difficult to ...

The BWT bestflush valve is recommended to install after the BWT besthead to easily run a few liters of water when replacing new filter.   It is hig...

Rocket Espresso OEM E61 complete brew valve (new version). Round pin - 59.5mm long.   Cross-references: Nuova Ricambi​ Part number Manufa...

1/8" x 1/8" MF BSP ball valve Cross-references: Part number Manufacturer V..525 Ascaso 3526697 LF A299904994 Rocket 202241  San Marco ...

Rocket complete exhaust valve.  Overall length 27mm. These used to be stainless steel but are now brass.   Cross-references: Part number ...

Rocket complete infusion valve with triangular pin.  Overall length 52.5mm. These used to be stainless steel but are now brass.   Cross-referenc...

OEM Rocket complete brew valve. Round pin - 55mm long. These used to be stainless steel but are now brass.     Cross-references: Nuova Ricamb...

S2 Valve. Back pressure self-priming.   Cross-references:  Part number Manufacturer 1331019 LF C200002112 Rocket

Delivery valve for water container   Cross-references: Part number Manufacturer 1680062 LF C430003482 Rocket

E61 manual group complete exhaust valve.  Overall length 27mm. Note: The pin is secured with loctite in the factory to ensure is does not come u...

E61 complete infusion valve.  Total length is 53mm. They are a couple versions of this valve so made sure that you measure your existing valve bef...

E61 complete brew valve (new version). Round pin - 55mm long. Used in many manual E61 based machines.   Note: The pin is secured with loctite in...

Complete E61 steam or water valve assembly.  Steam wand connection is connections ø 3/8"F.    Cross-references: Part number Manufacturer F...

E61 manual group complete exhaust valve.   Cross-references: Part number Manufacturer F..238 Ascaso 2161136648  Faema 903828000  Fae...

E61 complete infusion valve. They are a couple versions of this valve so made sure that you measure your existing valve before ordering.   Cross-...

E61 complete brew valve. Round pin - 53mm long. Used in many manual E61 based machines.   Cross-references: Nuova Ricambi​ Part number Manu...

Fetco brew valve replavement kit.  This is the 24VDC valve and it replaces old part number 1102.00222.00   Fetco part 1000.00114.00

3/8" x 3/8" FF BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part nu...

3/8" x 3/8" MM BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part nu...

Used in all models of Simonelli and some Victoria Arduino equipment.   Cross-references: Part number Manufacturer S...65 Ascaso 25-002+2...

3/8" x 3/8" MF BSP ball valve The handle on the valve is sometimes black and sometimes red, but the parts are the same. Cross-references: Part n...