O-rings & Gaskets

Fits models CBS-2021eG, CBS-2021eP, CBS-2031e, CBS-2031ee, CBS-2031s, CBS-2032e, CBS-2032ee, CBS-2032s, CBS-2041e, CBS-2041ee, CBS-2042e, CBS-2042e...

Grounds Chute Gasket compatible with ground chute for Encore, Encore ESP, Virtuoso+, and select discontinued Conical Burr grinders. Baratza part n...

O-RING 0060-20 Siliconering thickness 2.0mm - internal ø6.0mm   Cross-references: Part number Manufacturer I-17 Ascaso 5332144800  DeLongh...

O-ring 04131 EPDM ring thickness 3.53 mm - internal ø 32.93 mm   Cross-Reference: Part number Manufacturer S..980 Ascaso P..130 Ascaso 74...

Used primarily in E61 style steam and water valves. O-ring 03068 EPDMring thickness 2.62 mm - internal ø 17.13 mm   Cross-references: Part number...

Viton O-ring 03081 for ODE solenoids. 2.62 mm thick, ID 20.24 mm.  La Marzocco part number H.1.022

La Pavoni piston sleeve o-ring.  Fits all Millennium models of Europiccola and Professional. O-ring 0152 Viton Rubber - ring thickness 3.53 mm - in...

Round Copper Gasket (21x17x2mm)   Cross-references: Part number Manufacturer 01172035  Elektra 1186939 LF C479900673 Rocket

O-RING 0040-20 Siliconering thickness 2.0mm - internal ø4.0mm   Cross-references: Part number Manufacturer I-91 Ascaso 1786257 LF 140326...

O-RING 0850-30 Silicone.  Thickness 3.0 mm - Internal ø 85.00 mm   Cross-references: Part number Manufacturer 12000087 Gaggia 996530007739 Ga...

Elektra Microcasa sight glass silicone gasket.   ø 15x9x8 mm   Cross-references: Part number Manufacturer 00119035 Elektra 1186375...

PTFE gasket 58 x 51 x 2 mm.   Cross-references: Part number Manufacturer C..315 Ascaso 401194010  Casadio 401194000  Cimbali 40119401...

For the Marzocco paddle group, this is the large lower o-ring, three per group. Three are also used for the GS3 drain connection. Ring Thickness 2...

OR 0106, also used as the ECM steam wand tip o-ring, the Grimac water inlet activating rod and Faema E-66/P-6 valve drawer o-ring.

PTFE Gasket for steam valve seat.  12 x 10 x 1 mm. La Marzocco part number F.4.001

You will need a special tool to get to this o-ring, as it is above the diffuser. 3.53mm thick x 20.22mm inside diameter - 04081 EPDM. Cross-referen...

O-ring 03050 Silicone Thickness 2.62 mm - Internal ø 12.37 mm   Cross-references: Part number Manufacturer AZ..36 Ascaso AZ..63 Ascaso 0...

ORING 2-217 137 29.75 X 3.53 Cross-references: Part number Manufacturer 5105880 LF H.1.016 Marzocco

Seals the internal group siphon tube to the group head. ORING 02062 DIA INT 15,6 SPESS.

38 x 34 x 1.5 mm. Placed in between the doser and the grinder body, only used in the MD-40 model.

O-ring 04075 Viton ring thickness 3.53 mm - internal ø 18.64 mm   Cross-Reference: Part number Manufacturer F..206 Ascaso 12024  Astoria CM...

Used for Marzocco Strada manual paddle pressure gauge fitting (lower).2.62 x 6.02 mm La Marzocco part number H.1.020

O-RING 0119 EPDM. For some group head caps and other applications 2.62 mm thick x 15.08 mm inside diameter.   Cross-references: Part number Man...

175 x 123 x 2 mm. Holes measure 10.5 mm inside diameter, and are spaced at 61 mm on center.   Cross-references: Part number Manufacturer R.....