Gicar

1/4" BSP, 100mm. The auto-fill probes on some equipment are bent prior to installing into the side of the boiler, so be sure to keep your old one s...

1/8" BSP, 115mm.   Cross-references: Part number Manufacturer CRP.24  Ascaso 400.020  Fast Ricambi 9.0.83.98G  Gicar 1341802  LF 342000...

1/4" BSP, 140mm. The auto-fill probes on Simonelli equipment are bent prior to installing into the side of the boiler, so be sure to keep your old ...

1/4" BSP, 80mm. The auto-fill probes on some equipment are bent prior to installing into the side of the boiler, so be sure to keep your old one so...

Digital thermostat PID 110V body dimensions 61x29x52 mmframe dimensions 70x31 mm Cross-Reference: Part number Manufacturer 10200120 Expobar ...

Expobar Auto-Fill Circuit. Gicar RL30/1E-2R/F 115V.   Cross-Reference: Part number Manufacturer 60100106  Expobar 60100210  Expobar 9.1.4...

PTFE plastic with two embedded magnets.

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...

1/4" female BSP fittings. Water inlet flow orifice measuring 1.15 mm - NSF approved. Some flow-meters have 1/8" fittings, so be sure you are orderi...

Fits all Gicar flowmeter bodies, though check your lid: the pin configuration may be different.  It is recommended that you also replace the oring.

This is the Gicar FMRT-F-F version, with a 1.15 mm diameter orifice (nozzle). G 1/4" female threads. Cross-references: Part number Manufacturer ...

Does not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.

This is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping Gicar code 9.1.00.67G. Auto-fill ...

This is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping Gicar code 9.1.40.97G. Auto-fill ...

This is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping Gicar code 9.1.19.18. Auto-fill l...

1/4" female BSP fittings. Water inlet flow orifice measuring 1.5 mm - NSF approved.   Cross-references:  Part number Manufacturer C..834  Ascas...

NSF certified low pressure flowmeter with 7mm barbed outlet fitting.   Cross-references:  Part number Manufacturer 9.0.99.28G Gicar 5032820 L...

Designed specifically for, and only used in, the Oscar model. Gicar RL30/2S/3R 115V.   Cross-Reference: Part number Manufacturer 9V8353  De V...