Rancilio

1/4" M BSP x 1/4" M BSP, 31mm L, 15mm wrench, lead-free brass.

3/4" BSP locking nut.   Cross-references:  Part number Manufacturer 506.399  Fast Ricambi 507.052  Fast Ricambi 3523086  LF 18010648 ...

3/8" British Standard Pipe x 4 mm, uses a 20 mm wrench.   Cross-references: Part number Manufacturer S..429 Ascaso 5082588 LF 00300013 Nu...

If you know what you are doing, then this steam wand can be used to get rid of the cumbersome Pannarello milk frother. This is an original Rancilio...

Pre-bent copper water tubing, with chromed lower steam arm. The copper tube has a flare and fitting on one end, which attaches to the steam valve. ...

M5 x 12 mm slotted hex head.   Cross-references: Part number Manufacturer MS.111 Ascaso P..182 Ascaso R...40 Ascaso R...49 Ascaso 5...

UL approved, does not include capillary fitting or ferrule. Only for machines before S/N 10221269 PIN 132287 with old boiler cap. When installing, ...

D3 H106, 10.5 mm diameter.  

Internal teeth, 26 mm x 18 mm Cross-References: Part number Manufacturer 1348829 LF 37431600 Promac 37431600 Rancilio

Affixes the micro-switch housing to the body of the MD-50 and MD-80 grinders. Hexagonal head, metric M4

Designed specifically for the Classe & Epoca series, but will fit all other commercial models, such as the Promac and Laranzato. New diamond-sh...

Direct from Rancilio, OEM product, they've chosen Recor as their preferred manufacture. Uses two o-rings and two fixing nuts, not included. Older v...

Used on the Classe 10, Epoca, Epoca one group and the Rancilio MD-80 grinder.

Rancilio 3/8" M x 1/4" M Fitting for Drain Exhaust Tube Rancilio part #23220026.

OEM product. Fits Rancilio models that have a wand with a 10 mm outside diameter, and each thread is 1 mm apart from peak to peak; 1.0 thread pitch...

Used in the Classe models.  0 - 2.5 bar. One 1/8" BSP pipe fitting. Rancilio part  # 35002508 

Used in the Classe models.  0 - 16 bar. One 1/8" BSP pipe fitting Rancilio part  # 35002509 

Replaces all the old versions.   Cross-references: Part number Manufacturer R..403 Ascaso 8R0017 De Vecchi Giuseppe  527.433 Fast Ricam...

M10 x 1mm thread, solid stainless steel, includes o-ring.

Used mostly on the Classe 6, but also on the Silvia and the grinders:

M10 x 1mm thread, solid stainless steel, includes o-ring.

3/8 cap for the top of the heat exchangers  

The o-ring (not included) slips onto this. Still widely used today, in every model.   Cross-references: Part number Manufacturer R..122 ...

Will fit any Rancilio model. Does not include a basket. Comes with new open spout.   Cross-references: Part number Manufacturer DVGPFGDCP  De...