Newest Products

Immersed Length 420 Mm - 2 PolesConnection Ø 1"1/4For 2-4 Groups Coffee Machine. Does NOT include the heating element gasket. Cross-references: ...

16A 250V Manual reset thermostat 130°C/266°F (bipolar) (CE).   We recommend the use of thermal paste (or “grease”) to aid heat transfer between the...

Immersed Length 650 Mm - 2 PolesConnection Ø 1"1/4For Coffee Machines With 4 Groups.  Does not include gasket. Cross-references: Part number ...

Immersed Length 650 Mm - 2 PolesConnection Ø 1-1/4"For Coffee Machines With 4 Groups.  Does not include gasket. Cross-references: Part number...

"Boosted" heating element for the three group machines. 50 cm immersed length. 37 mm socket would be best, but a 36 mm fits barely.   Immersed Leng...

Boosted heating element for 220/240V two group machines. Draws 12.5amps (on 240V) and increases recovery time. Immersed Length 390 Mm - 2 PolesConn...

Immersed Length 290 Mm - 2 PolesConnection Ø 1"1/4For Coffee Machines With 2 Groups.  Does not include gasket. Cross-references: Part number ...

Immersed Length 600 mm - 2 PolesConnection Ø 1"1/4For 3 Groups Coffee Machines.  Does not include gasket. Cross-references: Part number Manuf...

This is a higher wattage or "boosted" power heating element (the standard is 1600W), for faster recovery time.  Immersed Length 500 mm - 2 PolesCon...

M8 x 20mm Bolt.  1.25 metric thread. Cross-references: Part number Manufacturer AS..64 Ascaso AS..65 Ascaso R..117 Ascaso SP.165 Ascas...

103 x 72 mm, paper.

53 x 43 x 3mm. Fits any 1-1/4" flange threaded element. Cross-references: Part number Manufacturer CA..20 Ascaso 74.00011 Carimali 8G98...

Paper composite 17 x 13 x 2 mm

1/4" BSP, 140mm. The auto-fill probes on Simonelli equipment are bent prior to installing into the side of the boiler, so be sure to keep your old ...

These are shipped straight and unbent: gently bend with a pipe bender to fit. La Marzocco part number TL09

This is a special order item. Please allow 6 - 10 business days (typically) for the item to be processed prior to shipping.   Solid State Relay -...

For the Strada, GB-5, FB-80, GS3 and Linea PB brew boilers. Marzocco #E.1.005.

Allen head bolt for the rubber feet. 

Manufactured by Fluid-o-Tech  for the La Marzocco 'GS-3' and 'Linea Mini', this is a short version stainless steel booster pump, measuring 90 mm de...

This is a special order item. Please allow 6 - 10 business days (typically) for the item to be processed prior to shipping. 3/8" female fitting w...

3/8" Female British Standard Pipe.

These are a 1/2" BSP thread, but the outside diameter has been reduced so that they fit in the drain cup as low as possible. Tricky to install you ...

PRESSURE SWITCH XP110 125 0.5-1.2 BAR 1/4". Connection ø 1/4"M - 15A 125/250V, preset 1 bar. It should be noted that these pressurestats were not d...

For hoses 8.8 - 9.3 mm    Cross-references: Part number Manufacturer 15056001  Astoria CMA 184320200 Gaggia 3449404  LF 170110 Ma...