Newest Products

Accepts the coarse thread knob/handle. For Linea/FB70 models. No ancillary parts, such as the o-rings or cotter pins are included.   Cross-referenc...

2mm thread pitch (or 'coarse' thread) means that these knobs have threads on the inside that measure 2 millimeters from thread peak to thread peak....

26x16.5x1 Mm   De Vecchi Giuseppe  8F383  Faema 4051052071 LF 1528130 La Marzocco  L165/2  Nuova Ricambi  552071

Stainless steel cotter pin. ø 2 x 12mm, measured from the end of the shortest portion to the first bend   Cross-references: Part number Man...

OR 0106, also used as the ECM steam wand tip o-ring, the Grimac water inlet activating rod and Faema E-66/P-6 valve drawer o-ring.

From the solenoid valve to the hot water spigot. Cross-references: Part number Manufacturer BF.562 Ascaso 07202.0.00.04 Brasilia 07202.0.1...

This it the part that the rubber seat seal presses against, closing off the steam.  La Marzocco part number F.3.007

These will work in any machine, of course, but for La Marzocco auto-fill applications they are installed backwards, with the water flowing opposite...

12 x 31 mm, stainless steel. Cross-References: Part number Manufacturer R..609 Ascaso 528.190  Fast Ricambi F.3.005 La Marzocco 1250...

1/2" BSP Fixing Nut.   25 x 6mm   Cross-references: Part number Manufacturer F..850 Ascaso 22.01170 Carimali 30370140  Expobar 40340413...

Plastic threaded insert for the front of the GB5 and FB80 steam valve knobs.

This is a retro-fit kit to convert old version steam valves to accept the newer upgraded parts. It was designed specifically for GB5 and FB80 mod...

Suitable for the Linea, GB-5, FB-70 and FB-80. Does not include lock nuts or PTFE gasket.

Complete assembly for hot water.

Does not include the tip or fixing nut, but any version La Marzocco tip will fit. Approximately 7-1/2" long. This wand will work in conjunction w...

Stainless steel adapter. 1/2" male British Standard Pipe. La Marzocco part number A.1.005

Assembly required. Note that the anti-vacuum valve is not included, just the cap and gasket. The video tutorial for rebuilding the valve will hel...

1/8" Male BSP. Threads into the top of the FB-80/GB-5/Strada steam valves, or the Linea Classic steam wand. La Marzocco part L192

13 x 4 x 4mm, NSF approved For steam and water valves of a number of different manufactures, as well as the E-61 Manual Group valves, and many othe...

For the FB80 and GB5 models. Uses the this gasket or the viton version

The new version that uses 5 o-rings. La Marzocco part number A.1.002.01

O-RING GASKET M 0050-20 VITON La Marzocco part number H.1.005

Old part number A.1.001, replaced by A.1.001.01, now includes the threaded fitting for the anti-vacuum valve. Used in GB5, FB80 and Strada machin...

La Marzocco GB5/FB80 Steam Valve Knob Stop Screw.  M6 Thread. Marzocco I.1.015