Best Selling Products

Rocket Auto-Fill Circuit.  For machines manufactured before 2018 (up to S/N D1915).   You might also need the 6-pin green connector.   Cross-Refere...

1/4" BSP, 140mm. The auto-fill probes on Simonelli equipment are bent prior to installing into the side of the boiler, so be sure to keep your old ...

Digital thermostat PID 110V body dimensions 61x29x52 mmframe dimensions 70x31 mm Cross-Reference: Part number Manufacturer 10200120 Expobar ...

PTFE plastic with two embedded magnets.

1/4" BSP, 80mm. The auto-fill probes on some equipment are bent prior to installing into the side of the boiler, so be sure to keep your old one so...

1/4" female BSP fittings. Water inlet flow orifice measuring 1.15 mm - NSF approved. Some flow-meters have 1/8" fittings, so be sure you are orderi...

Fits all Gicar flowmeter bodies, though check your lid: the pin configuration may be different.  It is recommended that you also replace the oring.

Expobar Auto-Fill Circuit. Gicar RL30/1E-2R/F 115V.   Cross-Reference: Part number Manufacturer 60100106  Expobar 60100210  Expobar 9.1.4...

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...

1/4" BSP, 100mm. The auto-fill probes on some equipment are bent prior to installing into the side of the boiler, so be sure to keep your old one s...

Does not include o-ring. A good flowmeter lid should read 1.8- 2.2k ohms with a voltage meter.

This is the Gicar FMRT-F-F version, with a 1.15 mm diameter orifice (nozzle). G 1/4" female threads. Cross-references: Part number Manufacturer ...

Designed specifically for, and only used in, the Oscar model. Gicar RL30/2S/3R 115V.   Cross-Reference: Part number Manufacturer 9V8353  De V...

1/8" BSP, 115mm.   Cross-references: Part number Manufacturer CRP.24  Ascaso 400.020  Fast Ricambi 9.0.83.98G  Gicar 1341802  LF 342000...

Rocket Auto-Fill Circuit.  For machines manufactured after 2018 (from S/N D1915).   You might also need the 6-pin green connector.   Cross-Referenc...

This is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping Gicar code 9.1.00.67G. Auto-fill ...

NSF certified low pressure flowmeter with 7mm barbed outlet fitting.   Cross-references:  Part number Manufacturer 9.0.99.28G Gicar 5032820 L...

1/4" female BSP fittings. Water inlet flow orifice measuring 1.5 mm - NSF approved.   Cross-references:  Part number Manufacturer C..834  Ascas...

This is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping Gicar code 9.1.19.18. Auto-fill l...

This is a special order item. Please allow 1 - 2 weeks (typically) for the item to be processed prior to shipping Gicar code 9.1.40.97G. Auto-fill ...