Musica Hydraulics

Bilt Oscar is an innovative descaling device for domestic and office espresso machines.  It paasively removes calcium, magnesium and impurities fro...

Bilt Oscar is an innovative descaling device for domestic and office espresso machines.  It paasively removes calcium, magnesium and impurities fro...

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

Ulka Type EX5. 120V / 60 Hz, 41 W. This Ulka brand vibratory pump is used in many various home espresso machines and in some rare cases, commercial...

There are many other applications for this o-ring besides the solenoid flange. This a silicone version of OR 02025. A Viton® rubber version is also...

Ulka Type EP5. 120 V/60 Hz, 41 W. This Ulka brand vibratory pump is used in many home espresso machines (current model Rancilio Silvia) and in some...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

This sized o-ring are used in almost every espresso machine manufacture for a multitude of applications, mostly involving the steam and water valve...

8 mm outside diameter by 5 mm inside diameter. Sold in one meter (1 meter equals a little over 3 feet) sections.   Cross-references: Part numbe...

For hoses 8.8 - 9.3 mm    Cross-references: Part number Manufacturer 15056001  Astoria CMA 184320200 Gaggia 3449404  LF 170110 Ma...

1/8" F BSP x 6 OD 4 ID compression barb elbow fitting.   Cross-Reference: Part number Manufacturer 1349196 LF 07300530 Nuova Simonelli

 6mm barbed T hose fitting    Cross-references: Part number Manufacturer 1315023 LF F05000012 Nuova Ricambi 05000012 Nuova Simonelli ...

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

Santoprene rubber, internal pump connection ø 6 mm, hose-end fitting ø 7.5 mm.   Cross-Reference: Part number Manufacturer 7303001  Bezze...

Inversys ARS CP3A/ST5. 120 V/60 Hz, 55 W. This Invensys ARS brand vibratory pump is used in many home espresso machines and is more silent that Ulk...

O-ring 02112 Viton   Cross-references: Part number Manufacturer V..502 Ascaso 12315  Astoria CMA 7496020  Bezzera 87.00123  Carimali...

110/120V 1/8" F x 1/8" F Two-Way CEME Solenoid 5220 - max 3 barFKM seal - orifice ø 2.0 mmwith coil B4 14VA 100/120V 60Hzfluid temperature -10°C+14...

PTFE plastic with two embedded magnets.

Replaces the old plastic frame for rubber vibratory pump supports with two each rubber supports, screws, washers and self-locking nuts. ASSEMBLY (f...

3/8" M x 1/4" M BSP  Fitting   Cross-references: Part number Manufacturer AMD.98 Ascaso V..313 Ascaso 25716 Astoria CMA 25716002 Astor...

Fits all Gicar flowmeter bodies, though check your lid: the pin configuration may be different.  It is recommended that you also replace the oring.

For hoses 7.8 - 8.3 mm    Cross-references: Part number Manufacturer 15056000 Astoria CMA 9824800009 DeLonghi 3449402 LF 65423011 R...

Connector for Gicar flowmeters. The female voltage terminal slots are spaced at 9.5 mm from left to right and the center ground wire terminal slot ...