Tier 1 Affiliate Program

Stainless steel 3/8" M x 3/8" M BSP Fitting   Cross-references: Part number Manufacturer C..105 Ascaso MZ.369 Ascaso V..310 Ascaso 2568...

This part is required for installing some espresso machines and is placed in-line on the outward flow water fitting from a rotary vane pump. Also r...

3/8" M x 3/8" M BSP Pump Fitting with recess for filter  

Generic 3/8" M x 3/8" F BSP Elbow Fitting.  Cross-references: Part number Manufacturer SP.282 Ascaso V.1871  Ascaso 1230200016  Grimac ...

Generic 3/8" M x 3/8" M BSP Elbow Fitting.  Sometimes brass and sometimes nickel plated.   Cross-references: Part number Manufacturer V..906 ...

3/8" British Standard Pipe x 5 mm, uses a 19 mm wrench.   Cross-references: Part number Manufacturer 4038136012  Faema L183/1  La Marzocco ...

3/8" British Standard Pipe x 4 mm, uses a 20 mm wrench.   Cross-references: Part number Manufacturer S..429 Ascaso 5082588 LF 00300013 Nuo...

M3 nut for machine screws.

Made of high quality 18/8 gauge stainless steel, this Brew Pitcher is an industry standard for espresso brew receptacles.  This handy Espresso brew...

Barista Basics 3oz Shot Glass. This heat resistant shot pitcher has everything you need with a handle and three pour spouts. Graduated marks read i...

Perfect for pulling shots and measure small amounts of liquid. Graduated marks read in ounces and milliliters for all your measuring needs. Feature...

This high quality thick walled clear glass features both ounce and milliliter measurement markings. Measurements are 10ml -110ml in increments of 1...

This frothing thermometer is designed to provide fast and accurate measurements in both Fahrenheit and Celsius. Its large 45mm (1-3/4") dial featur...

Blank, blind portafilter for back flushing group heads.  This is for machines using 53mm baskets such as Spaziale, Astoria CMA and Wega.  Make sure...

6.5 mm hole for screw. Fits La Marzocco, Slayer, Synesso and (old) Carimali. Cross-references: Part number Manufacturer MZ.275 Ascaso 8MZ...

Blank, blind portafilter for back flushing 57mm group heads.   

Blank, blind portafilter for back flushing group heads. Used with most commercial machines such as Astoria, Brasilia, Faema, Futurmat, Gaggia, La M...

Fits Rancilio MD-40 and MD-50 foot screws.

Made of high quality 18/8 gauge stainless steel, this Brew Pitcher is an industry standard for espresso brew receptacles.

6-Pin green wire loom plug that connects to the Gicar auto-fill circuit.   Cross-Reference: Part number Manufacturer 7631516 Bezzera 8.6.17....

Capacitor 6.3 µf 450v 50/60hz.  Operating Temperature -25+85°cIn Compliance With Eec 93/68 And Eec 92/31 Regulation   Cross-references: Part num...

Santoprene rubber, internal pump connection ø 6 mm, hose-end fitting ø 7.5 mm.   Cross-Reference: Part number Manufacturer 7303001  Bezze...

70 x 57 x 0.8 mm. This paper shim is used to increase the profile height of a group gasket in cases where portafilter wear causes the portafilter t...

70 x 57 x 1 mm. This EPDM shim is used to increase the profile height of a group gasket in cases where portafilter wear causes the portafilter to e...