R58 Group

Unlike regular gaskets that are made from rubber these do not have any smell or taste whatsoever, and are easy to change since they will not bake r...

Unlike regular gaskets that are made from rubber these do not have any smell or taste whatsoever, and are easy to change since they will not bake r...

The Dow Corning Molykote 111 silicone lubricant is one of the best lubricant on the market.  It is NSF certified and perfect for all espresso machi...

IMS Nanotech Series precision shower screen features a nanoquartz coating  that improves water distribution, reduces corrosion and increases chemic...

This E61 group head pressure gauge will allow you to measure the pressure going through the group head during the brewing process.  It screws right...

This gasket measures 73 x 57 x 8mm. Also available in 8.5mm, 9mm and 10mm as well as in silicone in 8mm and 8.5mm. If your portafilter is worn and ...

21 x 16.8 x 2 mm, for 3/8" fittings. Used in most cases to seal the steam and water wands and pipe fixing nuts to their valves, but has other appli...

The solution to no more burned coffee or taste is here, with the help of these La Pavoni or E61 coffee machine group head temperature strip set. On...

The Coffee Sensor E61 Group Head Thermometer will allow you to measure the temperature of the brew water just before it hits the coffee puck as wel...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

This E61 group head pressure gauge will allow you to measure the pressure going through the group head during the brewing process.  It screws right...

Used for the E61 group head cam rod stuffing gasket as well as in the steam or water valve assembly.  15.5 x 7.5 x 4mm EPDM gasket.   Cross-refe...

The Loctite® LB 8034 grease is easy to use. This item was formulated to work in automotive equipment applications. Unlike petroleum-based lubricant...

IMS Competition Series shower screen provide even water distribution and a better, more consistent extraction. The integrated 200µm membrane is cre...

13 x 4 x 4mm, NSF approved For steam and water valves of a number of different manufactures, as well as the E-61 Manual Group valves, and many othe...

E61 complete infusion valve.  Total length is 53mm. They are a couple versions of this valve so made sure that you measure your existing valve bef...

The Coffee Sensor flow control device allows the user to vary the amount of water flowing through the group head with a special needle valve that g...

E61 manual group complete exhaust valve.  Overall length 27mm. Note: The pin is secured with loctite in the factory to ensure is does not come u...

This gasket measures 73 x 57 x 8.5mm. Also available in 8mm, 9mm and 10mm as well as in silicone in 8mm and 8.5mm. If your portafilter is worn and ...

73.5 x 59 x 1mm. EPDM shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in ...

E&B Lab (by IMS) precision shower screen features a nanoquartz coating  that improves water distribution, reduces corrosion and increases chemi...

73 x 59 x 0.8mm. Paper shim for increasing the profile height of a group gasket in cases where portafilter wear causes the portafilter to engage in...

Rocket OEM O-ring for the base of the mushroom. ORM 0205-32 Silicone Thickness 3.20mm - internal ø 20.50mm   Cross-references: Part number Manuf...

PTFE Gasket (26x21x2mm) for 1/2" fittings.   Cross-Reference: Part number Manufacturer F.1854 Ascaso 27421009 Astoria CMA 7479960 Bezzer...